Ultra L
The Gridworx ULTRA system allows for the efficient installation of large format ultra-compact surface panels. Continuous rail anchors are fastened to the back face of panel in parallel rows, via an undercut anchor. These rails interlock with adjacent anchors attached to the substrate. Designed as a “floating mount system”, pitch bolts at the top channel allow for fast, pinpoint leveling.
All of our anchoring systems are designed to be mounted to the building substrate via our standard Thermally Broken Components providing space in the wall for insulation and adjustability.
These mounting systems allow for a precise and far more technical way of mounting wall panels thereby allowing for the introduction of mixed media presentations.
Miami Dade Windload Tested. Four full sized Dekton panels (56”x126”) were installed with the Ultra system on the test lab substrate creating a ten foot by twenty-foot wall. This wall was then subjected to a 187-mph wind load. Ultimately the testing facility admitted they could not break the system, shut down the testing and issued a PASSED report. No other system in the market can make this claim.
Continuous support panel dead-load
6′ X 12′ panels up to 1″ thick
6005A aluminum alloy T6 temper
75% minimum recycled content
Undercut Anchor
Mechanical Kerf Anchor & Gridworx Mechanical Kerf Lock Washer
Precise Alignment
Panel thickness range: 12mm – 20mm
