Undercut XLarge Floating

 Continuous support panel dead-load
6’ X 12’ panels up to 1’ thick
   6005A aluminum alloy T6 temper
 Undercut Anchor
 Mechanical Kerf Anchor & Gridworx Mechanical Kerf Lock Washer
 Precise Alignment
 75% minimum recycled content
Panel thickness range: 12mm – 20mm

About the system:
• 2 part floating mount system
• Utilizes 4” long panel clips that are applied to the back of panel via blind undercut anchors, location and spacing is dependent on panel strength.
• Ideal for cladding thicknesses 20mm to 50mm

Advantages include:
• No panel height limit (subject to engineer review)
• Once panel is installed, it has the ability to be raised/lowered or
tilted left/right
• Large panel sizes allow for more coverage per panel
• Thinner panel sizes can reduce labor expenses

The Gridworx UXF system system allows for the efficient installation of large format ultra-compact surface panels as well as Natural Stone Panels. Continuous rail anchors are fastened to the back face of the panel in parallel rows, via an undercut anchor. These rails interlock
with adjacent anchors attached to the substrate. Designed as a “floating mount system”, pitch bolts at the top channel allow for fast, pinpoint leveling. All of our anchoring systems are designed to be mounted to the building substrate via our standard Thermally Broken Components providing space in the wall for insulation and adjustability. These mounting systems allow for a precise and far more technical way of mounting wall panels thereby allowing for the introduction of mixed media presentations. Miami Dade Wind Load Tested and Approved. Four full sized Dekton panels (56”x126”) were installed with the Ultra system on the test lab substrate creating a ten foot by twenty-foot wall. This wall was then subjected to a 187-mph wind load. Ultimately the testing facility admitted they could not break the system, shut down the testing and issued a PASSED report. No other system in the market can make this claim.