Undercut XLarge Floating

 Continuous support panel dead-load
6’ X 12’ panels Large Format
   6005A aluminum alloy T6 temper
 Undercut Anchor
 Precise Alignment
 75% minimum recycled content
Recommended for panels between 20mm – 4″ thick”

About the system:

• 2 part floating mount system
• Utilizes 4” long panel clips that are applied to
  the back of panel via blind undercut anchors,
  location and spacing is dependent on panel
  strength.
• Ideal for cladding thicknesses 20mm to
  50mm
• Capable of supporting high density, cubic
  panels.

Advantages include:

• No panel height limit (subject to engineer
  review)
• Once panel is installed, the system has the
  ability to be raised/lowered and adjusted left
  / right.
• Large panel sizes allow for more coverage
  per panel
• Thinner panel sizes can reduce labor
  expenses
• Assembly depth matches Gridworx SKR
  system, allowing dual systems on the same
  subframe.
• Supporting ultra thin, large format panels
  from the top reduced the change